Embroidery section is one of the most important sections of our factory . It is one of the special task which is done according to the buyer’s requirements. In the past embroidery had done by using manual method. But now a day, it is done by applying computerized method. In readymade apparel sector, computerized embroidery machine helps to produce very complex design within a very short period of time.
Cheap Embroidery service for AUSTRALIA , CANADA and USA
Here at NODE CLOTHING , it is our goal to be the number one in quality when it comes to embroidey in AUSTRALIA, CANADA and USA. We are constantly innovating when it comes to embroidery quality,
Our service process
Embroidery is a decorative stitch which is placed on the garment to enhance its properties or advertise the brand of the garment.
There are styles that need the pocket, front or sleeve to be embroidered. It is the embroidery section supervisor’s responsibility to get the correct embroidery disk or tape from the production coordinator.
This tape is placed on the machine and the machine is set up to run 20 embroideries at once based on machine capacity.
The supervisor will adjust the machine speed so that it is suitable for the different fabric and embroidery types. And approved standard will be hanging with machine and follow according style.
Approved standard will be hanging with machine and follow according style. then all the pieces are checked 100% through needle detector machine and send it to cutting section when the embroidery operation is completed in embroidery section .
Finally cutting section will include all the parts together and deliver to sewing line. Cutting quality inspector must check each cut received from embroidery 100% for its quality and quantity.
Cutting in-charge has to follow bundle chart and ensure the entire cut received is as per its Quantity and number sequence. Any panel is to be returned in embroidery section for rectifying should be noted down in this report and should ensure that each panel will be returned to each bundle after correction or replacement.
Q.A (Quality assurance) Manager and Cutting in-charge must ensure each bundle which is going to be issued to the sewing line will be 100% correct and acceptable with quantity too. Full responsibility delegated to the embroidery section or plant about standard quality and each panel must be check for quality point advised by the QC (Quality controller) and its Quality Manager. QC has to submit this report to the QA Manager on daily basis.
Before sewing line input, Q.I (Quality in-charge) will check each bundle which is going to be passed through metal detector machine, also will be 100% correct and acceptable with quantity.
Our minimum order is 20 units per design for custom t shirt and embroidery. This includes variations in sizes and type of garments as long as the embroidery remains the same. We can also do embroidery sample ranges, however these will be done on an hourly rate basis.
For quoting purposes please attach artwork files or images whenever possible and indicate placements and approximate sizes where applicable.
Because the time to setup a design remains the same regardless of whether you’re doing embroidery 0 or 5000 t-shirts, the per embroidery price decreases as the number of units per design increases.
You can chose any fabric you want . we have a wide range of different fabrics sample .